DoMor Slit Seeder
Slit Seeders for Skid Steers, Mini Skid Steers & Tractors
Powered knives cut a seed bed, the seed drops at the rate you set, and hardened cast steel rollers press it into the soil, all in one pass. Overseed an existing lawn with minimal damage or seed a new one from scratch, in 48, 60 or 72 inch widths. Built in Eureka, Illinois, USA.
How it works
Cut, seed and roll in a single pass
Seed that sits on top of the ground washes away or feeds the birds. The DoMor Slit Seeder puts it in the soil where it germinates.
Cut the seed bed
Power-driven knives on the leading edge slice narrow slits in the soil, opening a bed for the seed without tearing up the turf around it.
Drop the seed
Seed feeds from the hopper into the slits at an application rate you adjust for the seed and the job.
Roll it in
Hardened cast steel rollers follow behind to press the seed into the soil for maximum seed-to-soil contact.
Watch it grow
Better seed-to-soil contact means better germination, so you get a full stand from the seed you paid for.
Why landscapers use it
Overseeding and new seeding with one machine
Seed-to-soil contact
Knives and rollers work together so seed ends up in the ground, not on top of it.
Easy on existing lawns
Narrow slits overseed thin turf while causing minimal damage to the lawn that is already there.
New seeding too
Just as good for primary seeding on bare, prepared ground as for overseeding.
Adjustable application
Change the seed rate to match different seed sizes and job requirements.
Fits your machine
Push and pull versions for skid steers and mini skid steers, or a PTO-driven 3-point model for tractors.
Compact package
Everything in one attachment: knives, hopper, metering and rollers, ready to work when you hook up.
Models
Seven models in three widths
Pick the width you need and how your machine runs it. Not sure which fits? Call us and we’ll match it to your skid steer, mini skid steer or tractor.
72SS Forward Push
Our widest push model for covering big areas fast.
72SS 3PT PTO
Tractor-mounted on the 3-point hitch, driven by the PTO.
60SS Forward Push
The mid-size push model for most residential and commercial lawns.
60SS 3PT PTO
Mid-size 3-point model for compact and utility tractors.
48SS Forward Push
Compact push model for tighter yards and gates.
48SS 3PT PTO
Compact 3-point model, PTO-driven, for smaller tractors.
48SS Reverse Pull
Pulled behind a mini skid steer, so you never drive over fresh seed.
See it work
The Slit Seeder in action
Watch the 48 inch reverse pull model cut, seed and roll behind a mini skid steer.
Watch the Slit Seeder workQuestions
Slit seeder FAQ
Which slit seeder fits my machine?
Forward push and reverse pull models run on skid steers and mini skid steers, and the 3PT PTO models mount on a tractor’s 3-point hitch and run off the PTO. Choose 48, 60 or 72 inches to match your machine and the size of your jobs, or call us and we’ll match it for you.
Can I overseed without tearing up the lawn?
Yes. The knives cut narrow slits for the seed and the rollers press them closed, so overseeding causes minimal damage to the existing turf.
Does it work for seeding a new lawn?
Yes. The Slit Seeder works for primary seeding on prepared ground as well as overseeding.
Can I adjust how much seed goes down?
Yes. The seed application rate is adjustable for different seed and job requirements.
Where are DoMor slit seeders made, and do you ship?
Every DoMor slit seeder is built in Eureka, Illinois, and we ship worldwide. Use the quote form below or call (309) 467-3483 for pricing with freight.
Request pricing
Get a quote on a Slit Seeder
Tell us what machine you run and the size of your typical job. We’ll recommend the right model and price it with freight to your location.