DoMor R600c
Aggregate Base Spreader for Dozers & Wheel Loaders
The R600c spreads road base 10½ to 16 feet wide and 2 to 22 inches deep in a single pass, with hydraulic control of each side of the moldboard for exact depth and crown. Trucks dump straight into it, it hooks to your dozer or loader in about 20 minutes, and it’s built in Eureka, Illinois, USA.
How it works
The “Rock Box” that lays base right the first time
Instead of dumping piles and blading them out, the R600c meters aggregate into an even lift as you push. Fewer passes, fewer people on the ground, and a consistent base from start to finish.
Hook it up
Attach the R600c to a bulldozer or wheel loader of 125 HP or more. It uses your existing machine and goes on in about 20 minutes.
Dump into the box
Tandem trucks, up to mid-size off-road trucks, back up and dump directly into the R600c. No windrows or piles to chase.
Set depth and crown
The self-contained hydraulic system sets each side of the moldboard independently, so you hit exact depth and the crown you want, anywhere from 10½ to 16 ft wide.
Push and spread
Push forward and the R600c lays a uniform lift from 2″ to 22″ deep, ready for compaction.
Why contractors use it
Lower spreading costs, better base
Since 1959, the R600c has helped contractors and municipalities cut aggregate spreading expenses, win more bids and deliver better results in less time.
Less material lost
Aggregate goes where you set it instead of being pushed off the edges, so you buy and haul less stone for the same job.
No segregation
Material is laid down evenly instead of being bladed out of piles, which keeps fines and coarse stone mixed for a stronger base.
Holds moisture content
Base goes down fast in one even lift, so the moisture content you need for compaction stays in the material.
Two ways to crown
Set each side of the moldboard independently to build the crown into the road as you spread.
Fewer laborers
The machine does the metering and leveling, so you need fewer people on the ground than conventional spreading methods.
Built to last
Heavy plate and tube construction with minimal maintenance, built for years of base spreading service.
See it work
The R600c on the job
Specifications
R600c specs
| General specifications | |
|---|---|
| Weight | 7,500 lb |
| Overall length | 8 ft 5 in |
| Overall width | 11 ft 4 in |
| Overall height | 4 ft 5 in |
| Inner length | 78 in |
| Inner width | 126 in |
| Spread width | 10.6 ft to 16 ft |
| Spread depth | 2 in to 22 in |
| Machine compatibility | |
|---|---|
| Push machine | Bulldozers and wheel loaders |
| Minimum power | 125 HP |
| Trucks | Tandem trucks up to mid-size off-road trucks |
| Hookup time | About 20 minutes |
| Moldboard control | Self-contained hydraulics, each side independent |
R600c add-on
R600c Fabric Spreader Attachment
Let the machine handle the fabric instead of a hand crew. The Fabric Spreader pins onto your R600c where the wheel assembly mounts, and the wheel assembly moves to the front of the spreader. From there the R600c works just like the original, cutting labor and job prep.
Questions
Aggregate spreader FAQ
What machine do I need to run an R600c?
A bulldozer or wheel loader with at least 125 horsepower. The R600c attaches to your existing machine in about 20 minutes.
How wide and how deep can it spread?
The R600c spreads base material from 10½ to 16 feet wide and from 2 to 22 inches deep.
What trucks can dump into it?
Tandem dump trucks, up to mid-size off-road trucks, dump directly into the R600c.
Can the R600c crown a road?
Yes. The self-contained hydraulic system sets each side of the moldboard independently, giving you two ways to build crown into the road as you spread.
What kinds of projects is it used on?
Levees, airport runways, rural roads, highways and any job that needs aggregate spread quickly and evenly. The R600c has been specified by the Army Corps of Engineers.
Where is the R600c made, and do you ship?
Every R600c is built in Eureka, Illinois, and we ship worldwide. Use the quote form below or call (309) 467-3483 for pricing with freight to your location.
Request pricing
Get a quote on an R600c
Tell us what dozer or loader you’re running and the work you have coming up. We’ll get you pricing with freight to your location.